|
|
Post by joker5774 on May 20, 2006 0:51:58 GMT -5
I have a 91 CRX and I swapped with a D16Y8 Vtec and I had to get a dizzy cause I couldn't use obd0 and need to know how you can tell if a dizzy is bad or not. The dizzy I got is not Firing but I dont wanna sink money into the used dizzy and take a chance of it not being any good at all.
Thanks
HENRY
yancey5774@hotmail.com
|
|
|
|
Post by civicking on May 20, 2006 14:52:18 GMT -5
you have to check the primary ignition system, that menas check the ignition modual and primary side of the coil, if thats up and running and still no spark you have a bad coil. i'm too lazy to wire abotu it all so here is some good info www.autonerdz.com/primary.htm |
|
|
|
Post by skinsef9 on Nov 3, 2009 0:57:51 GMT -5
what ecu do you have? what engine harness do you have?
|
|
|
|
Post by chenshui on Jun 17, 2011 3:00:25 GMT -5
|
|
