|
Post by truckguy on Apr 19, 2006 10:57:16 GMT -5
Hello I dedided that since this section is empty i would put a tech article in here on dent removal (i did this yesterday in case you were wondering) ___________________________________________________ Here is the dent that i will be working with.
|
|
|
Post by truckguy on Apr 19, 2006 10:58:17 GMT -5
okay now hold the dolley on top like so
|
|
|
Post by truckguy on Apr 19, 2006 11:00:03 GMT -5
now slowly work the hammer and dolley around the dent. remember to work from the outside of the dent in towards the center to prevent stretching the metal
|
|
|
Post by truckguy on Apr 19, 2006 11:01:47 GMT -5
this is the point where you would bondo it but im to cheep to waste bondo on a junk fender also there will also be a few high spots that will need to be tapped down
|
|
|
Post by truckguy on Apr 19, 2006 11:02:32 GMT -5
now some cheepo primer and its good as new
|
|