|
|
Post by silvercivic on May 26, 2006 17:47:47 GMT -5
 I am goin to turbo my D16 and was wondering what all I will need in order to tune the engine/turbo? I'm pretty sure I have all the parts I need... wastegate, manifold, BOV, Turbo, FMIC am I missing anything?
|
|
|
|
Post by civicking on May 26, 2006 19:15:35 GMT -5
yeah fuel and ignition tuning, that is what makes or breaks your motor, if you have the money go form hondata, it will work the best and is the safest for everyday tuning. with that you will need a bigger fuel pump (walbro) and bigger injectors(rc engineering).
|
|
|
|
Post by silvercivic on May 26, 2006 19:35:45 GMT -5
from what I've been told I won't need to buy bigger injectors that the stock ones will work. Also would it be better for me to get a specificlly tuned ecu instead of one that comes preset for certain settings?
|
|
|
|
Post by civicking on May 26, 2006 22:06:43 GMT -5
well whoever told you don't need bigger injectors does not know anything about cars, first the stock injectors on a honda are basically maxed out form the factory, why would they run bigger injectors then they need, smaller injectors are easier to control, so you will need bigger injectors period. also i don't know what kinda pre tuned ecu your talking about maybe if it comes with a kit you will be fine, and even then i would not use one because each car is different, so a hondata is dyno tuned to your specific car.
|
|
|
|
Post by chenshui on Jun 17, 2011 2:55:26 GMT -5
|
|
I am goin to turbo my D16 and was wondering what all I will need in order to tune the engine/turbo? I'm pretty sure I have all the parts I need... wastegate, manifold, BOV, Turbo, FMIC am I missing anything? 
